Skip to content
implantswiss
i-LiNQ

i-LiNQ i-conometric: i-conometric

i-Conometric: The Friction Retained Connection

i-conometric serves for friction retained, free of cement installation of bridges. In order to compensate axial divergences between implants, a 5° conical cap is placed onto i-LiNQ®. Cold welding is applied at 15 Ncm seating force. This conical cap is available in 0° and 15° angulation.

i-conometric abutment I-SILCONO50R
Brand
i-LiNQ — Implant and abutment system
Family
i-conometric
Type
Friction-retained restorations on the i-LiNQ® component
Category
Prosthetics

i-Conometric: The Friction Retained Connection

As in i-connect system, also in i-Conometric system precision in impression technique is crucial. Inaccuracies inevitably lead to poor fitting between the conical cap and the abutment interface, resulting in a loss of sufficient friction grip. Therefore, also for i-Conometric solutions, 2step impression technique is recommended:

In the first step, a simple closed tray impression should be taken by the 1piece impression posts. On a first model the PEEK caps of the 3piece impression posts should be splinted by resin material and sectioned into single parts.

In the second step, the resin-embedded PEEK caps are installed on the metal base part of 3piece impression posts and placed onto the i-Conometric caps. The small gaps between the single segments must be filled with a liquid resin material for re-splinting the segments intraorally. Taking impression can now be completed by using a closed tray.

i-Conometric cap is available in 0° and 15° angulation. i-Conometric abutments are available in diameter 5.0 mm and 6.5 mm and in gingival height short [S], regular [R] and long [L]. Angled abutments are not needed for i-Conometric technique and therefore not part of the product portfolio.

Components

Components

  • i-LiNQ i-conometric Abutment I-SILCONO50Ri-LiNQ i-conometric Abutment I-SILCONO65R

    i-conometric Abutment

  • i-LiNQ i-conometric Cap I-SILCONOC

    i-conometric Cap

  • i-LiNQ i-conometric cap, angled I-SILCONOC-15

    i-conometric Cap Angled

  • i-LiNQ i-conometric healing cap I-SILCONOHC50i-LiNQ i-conometric healing cap I-SILCONOHC65

    Healing

  • i-LiNQ i-conometric impression post I-SILCONOIP50i-LiNQ i-conometric impression post I-SILCONOIP65

    Impression

  • i-LiNQ i-conometric analog I-SILCONOCAPA

    Analog

  • i-LiNQ i-conometric component I-SILCONOWAC

    I-SILCONOWAC